The ETM-2000 series consists of 5 different systems and covers a broad variety of temperature applications. The series has 3 systems for thermocouples and 2 for Pt100 sensors. Both Pt100 models have IP67 (water proof) density, which make them well-suited for use in dairy wet rooms, slaughterhouses, and similar food environments. JOFRA ETM 系列數字溫度表
3 of the 5 systems have a 'SpeedRead' function, which calculates the temperature after just 14 seconds in the medium, a great timesaving feature when measuring granulates, powders, and atmospheres. Data logging is an option in the Pt100 system as well as in the thermo element system. Results are shown on the display or on a PC.
Features for the ETM
- Complete solutions (minimize the risk of errors)
- Flexible solutions (may be supplemented as needs change)
- The instrument is 'industry protected' (IP65 and IP67) with a rubber boot
- Systems dedicated for the food industry, HVAC, or general industry
- Systems available with or without data logging and software for documentation of critical measurements
ETM systems 1 & 2 - General industry
These are thermocouple systems with or without data logging. They are supplied with 4 different probes designed for surface, penetration, atmospheric measurements, and a flexible wire cable probe. The systems also contain contact paste, instructions, batteries, protective rubber boot and space for the EasyLink package containing infrared interface and software. The kit is supplied in a practical carrying case. These systems can be used throughout the process for control and logging of temperature data.
ETM system 2 & 3 - Food industry
These systems are primarily for control of refrigeration and freeze compartments, pasteurization, ovens, sterilization units, and similar applications. The systems employ Pt100 probes for optimum accuracy and are available with or without data logging. Both systems feature IP67 density for resistance in wet environments. The temperature range is from –50 to 250°C / -58 to 482°F. (The indicator, however, is able to measure from –150 to 800°C / -238 to 1472°F). Each system contains 3 different probes: a penetration probe with needle tip, a general-purpose probe, and an atmospheric probe. The systems are delivered in a practical carrying case with instructions, batteries, protective rubber boot, and space for the EasyLink package.
ETM system 5 - Heating and ventilation (HVAC)
This is a thermo couple system for use up to 1200°C / 2192°F. The system contains 4 probes: a general-purpose probe, a penetration probe for flue gas, a thin surface probe, and a flexible wire cable probe. The system is delivered in a practical carrying case with contact paste, instructions, batteries, and protective rubber boot.
